FACTS
➥ depending on the water level
➥ high proportion of air
➥ can be used above and underwater
This nozzle is dependent on the water level. The montage in relation to the water level changes the picture or the character of the effect.
This nozzle does not have an internal adjustment option. To set the perfect tilt angle, we recommend using an adjustment flange or a ball joint adaptor.
Bubbler Nozzle 3/4″ | Bubbler Nozzle 1″ | Bubbler Nozzle 1 1/2″ | Bubbler Nozzle 2″ | |||||
Material | Brass | Brass | Brass | Brass | ||||
Thread | 3/4″ Outer | 1″ Outer | 1 1/2″ Outer | 2″ Outer | ||||
Weight (kg) | 0.169 | 0.282 | 0.436 | 0.660 | ||||
Item Number | AIM-FN030-3/4 | AIM-FN030-1 | AIM-FN030-1 1/2 | AIM-FN030-2 |
This type of nozzle is independent of the water level. The mounting position of the nozzle can therefore be freely selected as long as the water outlet is not below the surface of the water. Positioning freely in the room is also possible.
This nozzle does not have an internal adjustment option. To set the perfect tilt angle, we recommend using an adjustment flange or a ball joint adaptor.
Jet Beam 1 1/2″ | Jet Beam 2″ | |||
Material | Stainless Steel (AISI 304) | Stainless Steel (AISI 304) | ||
Thread | 1 1/2″ Outer | 2″ Outer | ||
Weight (kg) | 0.51 | 1.07 | ||
Item Number | AIM-FN146-1 1/2 | AIM-FN146-2 |