FACTS
➥ adjustable direction and speed of rotation
➥ variable look and speed due to adjustable outer nozzles
➥ independent of the water level
This type of nozzle is independent of the water level. The mounting position of the nozzle can therefore be freely selected as long as the water outlet is not below the surface of the water. Positioning freely in the room is also possible.
This nozzle does not have an internal adjustment option. To set the perfect tilt angle, we recommend using an adjustment flange or a ball joint adaptor.
Rotating Nozzle ECO+ 1″ | Rotating Nozzle ECO+ 1 1/2″ | |||
Material | Brass | Brass | ||
Thread | 1″ Inner | 1 1/2″ Inner | ||
Quantity Arms | 6 | 8 | ||
Weight (kg) | 1.177 | 1.344 | ||
Item Number | AIM-FN022-1 | AIM-FN022-1 1/2 |
This type of nozzle is independent of the water level. The mounting position of the nozzle can therefore be freely selected as long as the water outlet is not below the surface of the water. Positioning freely in the room is also possible.
Swing Motor Single-Axis | |
Material | Die-cast aluminum |
Protection Class | IP68 |
Thread in Flow Direction | 1 1/2″ Outer ⇒ 1 1/2″ Inner |
Voltage Stepper Motor (V/DC) | 24 |
Scope of Delivery | inclusive Driver for Stepper Motor without Power Adapter without SwingController |
Weight (kg) | 8.9 |
Item Number | AIM-FN091-1 1/2 |
This type of nozzle is independent of the water level. The mounting position of the nozzle can therefore be freely selected as long as the water outlet is not below the surface of the water. Positioning freely in the room is also possible.
This nozzle does not have an internal adjustment option. To set the perfect tilt angle, we recommend using an adjustment flange or a ball joint adaptor.
Rotating Nozzle ECO 1″ | Rotating Nozzle ECO 1 1/2″ | Rotating Nozzle ECO 2″ | ||||
Material | Brass | Brass | Brass | |||
Thread | 1″ Inner | 1 1/2″ Inner | 2″ Inner | |||
Quantity Arms | 4 | 4 | 6 | |||
Weight (kg) | 0.874 | 1.03 | 2.2 | |||
Item Number | AIM-FN023-1 | AIM-FN023-1 1/2 | AIM-FN023-2 |
This type of nozzle is independent of the water level. The mounting position of the nozzle can therefore be freely selected as long as the water outlet is not below the surface of the water. Positioning freely in the room is also possible.
This nozzle does not have an internal adjustment option. To set the perfect tilt angle, we recommend using an adjustment flange or a ball joint adaptor.
Rotating Nozzle 5-15 E | ||
Material | Stainless Steel (AISI 304) | |
Thread | 1 1/2″ Outer | |
Fountain Height (Meters) | Water Requirement (Liters/Minute) | Water Pressure (Bar) |
1.00 | 141 | 0.25 |
1.25 | 158 | 0.31 |
1.50 | 173 | 0.38 |
1.75 | 187 | 0.44 |
2.00 | 199 | 0.50 |
2.50 | 223 | 0.63 |
3.00 | 244 | 0.76 |
3.50 | 264 | 0.89 |
4.00 | 282 | 1.01 |
Weight (kg) | 2.88 | |
Item Number | 50967 |
Data sheet on request